Moldflow/C-MOLD Filling + Juncture Losses
Test ID
G-001
Description
Properties needed to perform a Moldflow injection mold-filling simulation incorporating pressure drop in runner and gates are generated. These include Bagley corrected viscosity vs. shear rate at three temperatures (two in the processing range and one below). The entrance pressure loss (Bagley correction) is applied to the viscosity data; the residual contraction pressure loss is correlated to shear stress. Viscosity data are fit to Moldflow models.
Included Tests
| 1x | D-015 | Melt Density |
| 3x | R-012 | Capillary Rheology with Bagley Correction (1 Temperature) |
| 1x | R-018 | No-Flow Temperature |
| 1x | T-015 | Specific Heat |
| 1x | T-103 | Thermal Conductivity Scan |
Options
More advanced TestPaks are available to simulate packing, shrinkage and warpage.
Samples
: 1 kg of pellets
[details]Application
In addition to all the software capabilities using Filling data, this TestPak enables the juncture loss calculation which permits the simulation of pressure drop across runners and gates due to extensional effects.
