Transition and Eject Temperature

Test ID  
T-012

   
Description  
A differential scanning calorimeter is used to heat or cool the material over a temperature range, while measurements of heat flow are made.  Typically, the material is heated rapidly to its molten state and data is collected in the cooling mode to 40°C, at a constant rate of 20ºC/min.  The scan can also consist of collecting data while heating the material to its molten state.  Transition temperature (onset of crystallization transitions; Tg for glass transitions) and eject temperature (end of crystallization or glass transition) are recorded.    
Options  
Upon request, data related to the first heating or cooling can be reported.  
Standards  
ASTM D3418  
ISO 11357-2  
Data see sample data  
Thermal analysis curves and significant observed transitions are reported. This data appears in Matereality as Thermal Analysis.  
Replicates (# of times this test is repeated)  
1  
Samples  
1 - specimens, any type [?]

    

Application 		 
This test is typically required for mold filling analysis.