LS-DYNA Transversely Anisotropic Elastic Plastic (MAT037)


Test ID  
G-791

   
Description  
This TestPak consists of a tensile stress-strain with Poisson's ratio. Also calculated is the Lankford parameter associated with the transverse behavior of the material. A load curve specifying stress vs. plastic strain is included for plasticity modeling. (Warning: this option is available only if using shell elements.) Data are analyzed and formatted for input into the LS-DYNA MAT037 card.    
Included Tests  
# Test Id Test Name
1x D-010 Solid Density
2x M-206 Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio
 
Data  
Measured property data and model parameters are provided.  
Samples  
15 - thin sheets or film [?]
   
Application  
This model is useful for simulating transversely anisotropic material used in forming. The plastic option is available only for shell elements.