strengthening the materials core of manufacturing enterprises
  • explore

PAM-CRASH Strain Rate Dependent Isotropic Material

Test ID  

Tensile experiments are carried out over a range of strain rates ranging into the high speed impact regime. Tests include three stress-strain measurements in the .01-1 /s strain rate range and two high speed tensile stress-strain curves in the 10-100 /s range covering a total strain rate range of four decades. Poisson's ratio is provided. Data are analysed for use in the PamCrash Material 105 model.    
Included Tests  
# Test Id Test Name
1x D-010 Solid Density
2x M-204 Tensile Stress-Strain, Strength, and Modulus
1x M-206 Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio
2x M-232 High Speed Tensile Stress-Strain

-Very High Speed Tensile Stress-Strain test [M-235] for strain rates to 1000 /s

Measured property data and material card is provided. A PAMCRASH Material 105 card can be user-created from this data using your Matereality CAE Modeler.  
40 - high speed tensile bars [details]
This model is to be used with isotropic shell elements. Typically used for plastics and sheet metal.