 |
||||
 PROFILE
|
||||
 Engineering
Design Data |
||||
| Research
Support Service |
||||
| Test
Catalog |
||||
| Experimental Capabilities |
||||
| CAE Partners |
||||
| Newsletter |
||||
| ISO
17025 Quality System |
||||
| Terms
of Use |
| About Us | Partners | Login | Contact Us | Policies |  |
Home | | Site map | | Sign Up | |
 |
|||||||||
|
|
| |
| The
American Association for Laboratory Accreditation (A2LA) has accredited DatapointLabs
for technical competence in the field of mechanical testing (A2LA Certificate
# 1242.01). DatapointLabs maintains a quality system in accordance with ISO/IEC
17025-1999. DatapointLabs operates in accordance with ISO 9001 and ISO 9002 (1994). | ||
|
| ||
| Scope of accreditation | ||
| In recognition of the successful completion of the A2LA evaluation process, accreditation has been granted to this laboratory to perform the following tests on plastics: ASTM D256 Impact Resistance of Notched Specimens of Plastics ASTM D412 (Method A) Vulcanized Rubber and Thermoplastic Elastomers-Tension ASTM D575 (Method B) Rubber Properties in Compression ASTM D638 Tensile Properties of Plastics ASTM D648 (Method A) Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position (HDT) ASTM D695 Compression Properties of Plastics ASTM D790 Flexural Properties of Unreinforced and Reinforced Plastics ASTM D792 Specific Gravity (Relative Density) and Density of Plastics by Displacement ASTM D1525 Vicat Softening Temperature of Plastics (VST) ASTM D1693 Environmental Stress Cracking ASTM D2240 Standard Test Method for Rubber Property-Durometer Hrdness ASTM D2990 Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics ASTM D3417 Heats of Fusion and Crystallization of Polymers by Thermal Analysis ASTM D3418 Transition Temperatures of Polymers by Thermal Analysis ASTM D3763 High-Speed Puncture Properties of Plastics Using Load and Displacement Sensors ASTM D3835 Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer ASTM D4812 Unnotched Cantilever Beam Impact Strength of Plastics ASTM D5279 Dynamic Mechanical Properties of Plastics in Torsion ASTM D5930 Thermal Conductivity of Plastics Using the Line-Source Method ASTM D6110 Charpy Impact Resistance of Notched Specimens of Plastics ASTM E831 Coefficient of Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ISO 37 Rubber–Determination of Tensile Stress Strain Properties ISO 75 Determination of Temperature of Deflection Under Load (HDT) ISO 178 Plastics-Determination of Flexural Properties ISO 179-1 Plastics-Charpy Impact Properties Non-Instrumented ISO 180 Plastics Izod Impact Strength ISO 306 Plastics-Determination of Vicat Softening Temperature (VST) ISO527 Plastics-Determination of Tensile Properties ISO 604 Plastics-Determination of Compressive Properties ISO 1183-1 (Method A) Density and Specific Gravity ISO 6603-2 Multiaxial Impact Behavior of Rigid Plastics-Instrumented Impact Test ISO 6721-7 Plastics-Determination of Dynamic Mechanical Properties ISO 11357-2 Plastics-Differential Scanning Calorimetry (DSC)-Determination of Glass Transition Temperature ISO 11357-3 Plastics-Differential Scanning Calorimetry (DSC)-Determination of Temperature and ISO 11359-2 Plastics-Thermomechanical analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature ISO 11443 (Method A) Plastics-Determination of the Fluidity of Plastics using Capillary and Slit - Dye Rheometers GM 9094P Melting Point by Differential Scanning Calorimeter GM 9904P Multi-Axial Impact | ||
