DatapointLabs is now part of Applus laboratories

Test Catalog

Test ID Test name
C-120 Environmental Stress Cracking (ESCR)
D-010 Solid Density
D-015 Melt Density
D-016 Bulk Density
D-017 Drying for Moisture Sensitive Materials
D-018 Moisture Analysis
D-019 Water Absorption
D-020 PVT (Isothermal Heating)
D-021 PVT (Isobaric)
D-022 Volumetric Expansion Coefficient by PVT
D-023 High Rate PVT by Hybrid PVT/DSC
D-024 Solid State Compressibility (PVT)
D-026 High Pressure PVT
D-040 Volumetric Expansion Coefficient by DMA
G-000 Moldflow/C-MOLD Filling
G-001 Moldflow/C-MOLD Filling + Juncture Losses
G-002 Moldflow/C-MOLD Post-Filling
G-003 Moldflow/C-MOLD Post-Filling + Juncture Losses
G-006 Moldflow/C-MOLD Uncorrected Isotropic Shrinkage
G-007 Moldflow/C-MOLD Uncorrected Anisotropic Shrinkage
G-009 Moldflow/C-MOLD Mechanicals for Uncorrected Anisotropic Shrinkage
G-010 C-MOLD Filling/Cooling
G-011 C-MOLD Filling/Cooling + Juncture Loss (Bagley correction)
G-012 C-MOLD Post Filling for Amorphous Plastics
G-013 C-MOLD Post Filling + Juncture Loss for Amorphous Plastics
G-014 C-MOLD Anisotropic Shrinkage & Warpage (Amorphous Plastics)
G-015 C-MOLD Isotropic Shrinkage & Warpage (Amorphous Plastics)
G-017 C-MOLD Post Filling for Semi-Crystalline Plastics
G-018 C-MOLD Anisotropic Shrinkage for Semi-Crystalline Plastics
G-114 Moldflow CRIMS Shrinkage
G-115 Moldflow CRIMS Shrinkage + Juncture Losses
G-116 Moldflow MF/Stress Anisotropic
G-117 Moldflow MF/Stress Isotropic
G-120 Autodesk Helius PFA
G-150 Moldex3D Flow/Cool
G-152 Moldex3D Flow/Pack/Cool
G-154 Moldex3D Flow/Pack/Cool/Warp (Isotropic)
G-155 Moldex3D Flow/Pack/Cool/Warp (Anisotropic)
G-158 Moldex3D Isotropic Mechanical Properties
G-159 Moldex3D Anisotropic Mechanical Properties
G-170 DIGIMAT MX Elastic eX-E
G-171 DIGIMAT MX Elasto-Plastic (J2_EP)
G-171RE DIGIMAT J2_EP Reverse Engineering
G-172 DIGIMAT MX Druker Prager (DP)
G-172RE DIGIMAT DP Reverse Engineering
G-173 DIGIMAT MX Elasto-plastic with Damage (EP+D)
G-173RE DIGIMAT EP+D Reverse Engineering
G-174 DIGIMAT MX Crash (EVP)
G-174RE DIGIMAT EVP Reverse Engineering
G-175 DIGIMAT MX Creep (TEVP)
G-175RE DIGIMAT TEVP Reverse Engineering
G-176 DIGIMAT MX Warpage (Thermomechanic)
G-176RE DIGIMAT TE Reverse Engineering
G-178 DIGIMAT MX Crash (EVP) Multi-Direction Rate Dependent Model
G-190 Altair Multiscale Designer for Unidirectional (UD) Composites
G-210 I-DEAS Mold Fill/Cool
G-212 I-DEAS Packing
G-215 I-DEAS Isotropic Viscoelastic Shrink/Warp
G-216 I-DEAS Isotropic Shrink/Warp
G-220 VISI Flow Filling
G-222 VISI Flow Filling/Thermal
G-224 VISI Flow Shape
G-242 SIMPOE Thermoplastic Filling Analysis
G-244 SIMPOE Thermoplastic Filling Analysis with Warpage
G-250 Cadmould Filling
G-251 Cadmould Packing
G-260 SIGMASOFT Thermoplastic: Unfilled Amorphous Material
G-262 SIGMASOFT Thermoplastic: Filled Amorphous Material
G-264 SIGMASOFT Thermoplastic: Unfilled Semi-Crystalline Material
G-266 SIGMASOFT Thermoplastic: Filled Semi-Crystalline Material
G-268 SIGMASOFT Elastomer: Standard Filling + Curing
G-269 SIGMASOFT MIM
G-270 PlanetsX Flow / Pack / Cool (Thermoplastic Resin)
G-271 PlanetsX Flow / Pack / Cool / Warp (Thermoplastic Resin)
G-274 PlanetsX Flow / Pack/ Cool (Thermosetting Resin)
G-275 PlanetsX Flow / Pack/ Cool/ Warp (Thermosetting Resin)
G-310 POLYFLOW Extrusion (Viscous Isothermal)
G-312 POLYFLOW Extrusion (Viscous Non-Isothermal)
G-314 POLYFLOW Extrusion (Iso-Thermal Viscoelastic)
G-315 POLYFLOW Extrusion (Viscoelastic)
G-320 POLYFLOW Thermoforming (Isothermal)
G-321 POLYFLOW Thermoforming (Non-Isothermal)
G-330 POLYFLOW Blow Molding (Isothermal)
G-331 POLYFLOW Blow Molding (Non-Isothermal)
G-350 Polycad
G-360 VEL Basic
G-361 VEL Basic + Melt Thermal Properties
G-362 VEL Basic + Melt & Solid Thermal Properties
G-363 VEL Basic + Normal Stress & Elongational Viscosity
G-370 HyperXtrude
G-380 WinTXS Melt Only TestPak
G-382 WinTXS General TestPak
G-390 PELDOM Isothermal TestPak
G-392 PELDOM Non-Isothermal TestPak
G-393 PolyXtrue Extrusion TestPak
G-394 PolyXtrue Extrusion Economy TestPak
G-410 FIDAP CFD Isothermal
G-430 Universal TestPak-Elastic Plastic Model
G-432 Universal TestPak-Hyperelastic (Incompressible)
G-434 Universal TestPak-Hyperelastic (Compressible)
G-460 Universal TestPak-Rate Dependent Model
G-510 PAM-CRASH Strain Rate Dependent Foam
G-520 PAM-CRASH Strain Rate Dependent Isotropic Material
G-540 PAM-FORM Isothermal Forming
G-542 PAM-FORM Non-Isothermal
G-550 PAM-Comfort Cover (Static)
G-551 PAM-Comfort Padding (Static)
G-552 PAM-Comfort Foam (Static)
G-553 PAM-Comfort Foam (Dynamic)
G-600 RADIOSS Elastic Material Model (Law 1)
G-601 RADIOSS Johnson-Cook Quasi-Static Material Model (Law 2)
G-602 RADIOSS Tensile Rate Dependent Model (Laws: 2, 36, 44)
G-603 RADIOSS Quasi-Static Foam Material (Law 70)
G-604 RADIOSS Rate Dependent Foam Model (Law 70)
G-605 RADIOSS Rate Dependent Foam Model with Unloading (Law 70)
G-606 RADIOSS Hyperelastic Model (Law 42, 69)
G-607 RADIOSS Hyperelastic Model with Viscoelasticity (Law 42)
G-610 EXTRUD Extrusion (Non-Isothermal)
G-653 SolidWorks Nonlinear Elastic
G-654 SolidWorks Plasticity – von Mises
G-660 SolidWorks HyperElastic – Ogden and Mooney Rivlin
G-662 SolidWorks Viscoelastic (Creep)
G-680 Autodesk Inventor Isotropic Elastic Model
G-705 Abaqus Isotropic Elastic Model (*ELASTIC)
G-706 Abaqus Orthotropic Composite
G-708 Abaqus Metal Forming (*ELASTIC *CREEP, OPTION=POTENTIAL)
G-709 Abaqus Finite Elastic Plasticity (*HYPERELASTIC *PLASTIC)
G-711 Abaqus Elastic and Plastic model (*ELASTIC *PLASTIC)
G-712 Abaqus Rate Dependent Viscoplastic (*RATE DEPENDENT)
G-720 Abaqus Hyperelastic Incompressible (*HYPERELASTIC)
G-722 Abaqus Hyperelastic Compressible (*HYPERELASTIC)
G-723 Abaqus Hyperfoam (*HYPERFOAM)
G-724 Abaqus Crushable Foam (*ELASTIC *CRUSHABLE FOAM)
G-725 Abaqus Crushable Foam with Rate Dependency (*ELASTIC, *CRUSHABLE FOAM, OPTION=RATE DEPENDENT)
G-730 Abaqus Creep Model (*CREEP, LAW=TIME)
G-740 Abaqus Stress Relaxation (*VISCOELASTIC, TIME=RELAXATION)
G-742 Abaqus Viscoelastic Model (*VISCOELASTIC)
G-743 Abaqus Non-Linear NVH Model - Rubber and Foam
G-744 Abaqus Creep (*VISCOELASTIC, TIME=CREEP)
G-751 ANSYS Kinematic Hardening (BKIN, MKIN/KINH)
G-753 ANSYS Isotropic Hardening (BISO, MISO)
G-754 ANSYS non-linear kinematic hardening Chaboche model (CHABOCHE)
G-755 ANSYS Viscoelastic (TB, Prony or EVISC)
G-757 ANSYS Creep (CREEP)
G-759 ANSYS Ogden Foam
G-760 ANSYS Hyperelastic w/ compressibility (HYPER)
G-761 ANSYS Hyperelastic (HYPER)
G-762 ANSYS Multilinear Elastic (MELAS)
G-763 ANSYS Gasket (GASKET)
G-770 LS-DYNA High Speed 3 Point Flexural Rate Dependent Model (MAT_019 or MAT_024)
G-771 LS-DYNA High Speed Tensile Rate Dependent Model (MAT_019 or MAT_024)
G-771V LS-DYNA Validated High Speed Tensile Rate Dependent Model (MAT_019 or MAT_024)
G-772 LS-DYNA High Speed Foam Model (MAT_083 or MAT_163)
G-776 LS-DYNA GISSMO Failure Model
G-778 LS-DYNA SAMP-1 Semi-Analytical Model for Plastic (MAT_187)
G-780 LS-DYNA Hyperelastic (MAT_027)
G-782 LS-DYNA Hyperviscoelastic Rubber (MAT_077)
G-784 LS-DYNA Simplified Rubber with Rate Dependency (MAT_181)
G-790 LS-DYNA Forming (Barlat 3-parameter model: MAT_036)
G-791 LS-DYNA Transversely Anisotropic Elastic Plastic (MAT_037)
G-792 LS-DYNA Isotropic Elastic (MAT_001)
G-793 LS-DYNA Plastic Kinematic (MAT_003)
G-794 LS-DYNA Laminated Composite Fabric (MAT_054)
G-801 MSC.NASTRAN Linear Elastic (MAT1)
G-805 MSC.NASTRAN Orthotropic Elastic (MAT8)
G-807 MSC.NASTRAN Plasticity Model (MATS1)
G-808 MSC.NASTRAN Temp. Dependent Linear Elastic (MATT1)
G-810 MSC.NASTRAN Hyperelastic Incompressible Model (MATHP)
G-811 MSC.NASTRAN Hyperelastic Compressible Model (MATHP)
G-814 MSC.NASTRAN Creep Model (CREEP)
G-860 MSC.Dytran Isotropic Elastic (DMATEL)
G-869 MSC.Dytran Piecewise Linear Plasticity (Quasi-Static Properties) (DYMAT24)
G-870 MSC.Dytran Rate Dependent Flexural Piecewise Linear Plasticity (DYMAT24)
G-871 MSC.Dytran Rate Dependent Tensile Piecewise Linear Plasticity
G-901 MSC.MARC Linear Isotropic
G-905 MSC.MARC Orthotropic Linear Elastic
G-907 MSC.MARC Strain Rate Dependent Non-Linear
G-908 MSC.MARC Work Hardening Model
G-909 MSC.MARC Mechanical Temperature
G-910 MSC.MARC Creep/Stress Relaxation Model
G-912 MSC.MARC Isotropic Viscoelastic
G-914 MSC.MARC Hyperelastic Model
G-925 NX Nastran Linear Elastic (MAT1)
G-929 NX Nastran Isotropic Heat Transfer (MAT4)
G-932 NX Nastran Orthotropic (MAT8)
G-936 NX Nastran Gasket Material (MATG)
G-937 NX Nastran Hyperelastic (MATHE)
G-938 NX Nastran Hyperelastic Incompressible (MATHP)
G-939 NX Nastran Hyperelastic (Compressible) (MATHP)
G-940 NX Nastran Material Stress Dependence (MATS1)
G-941 NX Nastran Isotropic Temperature Dependence (MATT1)
G-942 NX Nastran Isotropic Creep (CREEP)
G-950 T-SIM Basic
G-951 T-SIM Basic + Thermal Properties
G-980 B-SIM Basic
G-981 B-SIM Basic + Thermal Properties
M-010 Anisotropic Tensile Moduli
M-011 Tensile Modulus
M-012 Compressive Modulus
M-013 Orthotropic In-Plane Shear Modulus (Includes M-010, M-101)
M-014 Bulk Modulus (Up To 8 Temperatures)
M-015 Flexural Modulus and Strength
M-016 Tensile Modulus, Strength and Elongation
M-017 In-Plane Shear Modulus (Plate Twist Method)
M-030 Tensile Strength
M-031 Compressive Strength
M-032 Tear Strength of Rubber
M-033 Blocking Strength
M-034 Short Beam Shear Strength
M-035 Plastic Point in Tension
M-036 Plastic Point in Flexure
M-037 Plastic Point In Compression
M-038 Shear Strength
M-040 Bearing Strength
M-041 Lap Shear Strength
M-043 Peel Test
M-050 Open Hole Tension (OHT)
M-051 Open Hole Compression (OHC)
M-060 Coefficient of Friction (Static and Dynamic)
M-067 Abrasion Test, Filament & Wire
M-068 Taber Abrasion Test
M-101 Poisson’s Ratio and Tensile Modulus
M-102 Poisson’s Ratio and Tensile Modulus (2-3 Direction)
M-130 Tensile Strength with Plots
M-204 Tensile Stress-Strain, Strength, and Modulus
M-204V True Stress Strain Measurements Using 3D DIC
M-205 Tensile Properties of Elastomers
M-206 Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio
M-209 Combined Loading Compression (CLC)
M-210 Compressive Stress-Strain, Strength and Modulus
M-211 Lubricated Compressive Stress-Strain (Biaxial Tension)
M-212 Compressive Properties of Elastomers
M-213 Confined Compression Stress-Strain (Hydrostatic, for rubbers)
M-214 Volumetric Stress Strain Curves
M-215 Compressive Properties of Foam with Unloading
M-218 Equibiaxial Tension of Elastomers
M-219 Shear Stress-Strain
M-220 Planar Tension (Shear)
M-221 3 Point Flexural Stress-Strain, Strength and Modulus
M-225 4 Point Flexural Stress-Strain, Strength and Modulus
M-230 High Speed 3 Point Flexural Stress-Strain
M-231 High Speed Compressibility of Foams and Elastomers
M-232 High Speed Tensile Stress-Strain
M-233 High Speed Compressive Stress-Strain
M-235 Very High Speed Tensile Stress-Strain
M-245 Forming Limit Diagram (FLD)
M-250 Tensile Creep
M-250H Tensile Creep With Humidity
M-251 Compressive Creep
M-252 Flexural Creep
M-254 Creep Rupture
M-260 Compression Set of Rubbers (Constant Deflection)
M-266 Long Term Instrumented Stress Relaxation
M-410 Dynatup Instrumented Impact
M-412 Falling Dart Uninstrumented Impact
M-425 Izod Pendulum Impact
M-426 Instrumented Izod Pendulum Impact
M-427 Charpy Pendulum Impact
M-428 Instrumented Charpy Pendulum Impact
M-502 Flexural Fatigue
M-504 Flexural Fatigue S-N Curves
M-508 Tensile Fatigue S-N Curve
M-509 3 pt. Flexural Fatigue S-N Curve
M-512 Tensile Fatigue
M-600 DMA - Tensile/Compressive ( 0.1-100 Hz)
M-600t DMA- Tensile/Compressive Mastercurve
M-601 DMA - Torsional (5 Temperatures, 0.1-500/s)
M-602 DMA - Flexural (0.1-100 Hz)
M-603 Shear Modulus vs. Temperature by DMA
M-604 Flexural Modulus vs. Temperature by DMA
M-605 Tensile Modulus vs. Temperature by DMA
M-606 Compressive Modulus vs. Temperature by DMA
M-610 Stress Relaxation/ Creep Compliance by DMA
M-611 Stress Relaxation/Creep Compliance by Time Sweeps
M-615 Creep-Relaxation by DMA-tensile, compressive or flex
M-620 Dynamic Hysteresis Loop
M-621 Cyclic Mullins Effect
M-622 Cyclic Hardening Stress-Strain
M-623 Cyclic Damage of Plastics
P-110 Heat Aging
P-210 Test Specimen Photo Documentation
Q-123 Extrusion Blow Molding Processability
Q-305 WSS-M99D68-A1
R-011 Capillary Rheology (1 Temperature)
R-012 Capillary Rheology with Bagley Correction (1 Temperature)
R-013 Very High Shear Capillary Rheology (1 Temperature)
R-014 Cogswell Extensional Viscosity
R-015 Thermal Flow Stability
R-016 Mooney Slip
R-017 Binding Extensional Viscosity
R-018 No-Flow Temperature
R-019 Rheotens Melt Elasticity
R-020 DMA Cone and Plate Dynamic Rheology (1 Temperature)
R-021 DMA Cone and Plate Steady Shear Rheology (1 Temperature)
R-022 DMA Parallel Plate Dynamic Rheology (3 Temperatures)
R-023 First Normal Stress Difference by DMA (1 Temperature)
R-024 Characteristic Relaxation Time by DMA (5 Temperatures)
R-025 Thermal Stability by Cone and Plate DMA
R-026 Transition Temperature by DMA
R-027 Cure Kinetics by DMA-isothermal
R-028 Cure Kinetics by DMA -non isothermal
R-030 Die Swell Measurements by Laser Micrometry
R-032 Static Die Swell/Sag by Laser Micrometry
R-035 Slit-Die Rheology (1 Temperature, 1 Die)
R-040 Equibiaxial Elongational Viscosity (1 Temperature, 1 Strain Rates)
R-042 Peldom Elongational Viscosity
SC-101 FTIR Analysis
SC-102 FTIR with EDS
SC-103 Pyrolysis Mass-Spec Analysis
SC-104 FTIR (micro) with EDS
SC-105 Ash Content by Muffle Furnace
SC-107 Flammability
SC-120 Odor Test
SC-201 Molecular Weight by GPC
SC-210 Fogging Test
SC-211 Thermal Oxidative Stability
SH-100 Western Europe Small Sample PickUp- 2 kg Limit
SH-200 Western Europe Large Sample PickUp- 25 kg Limit
SM-065 Rockwell Hardness
SM-067 Durometer Hardness
SM-210 Optical Haze / Optical Transmission
SM-210 Optical Haze / Optical Transmission
SO-200 Matereality Personal Material DatabasePro
SO-201 Matereality Workgroup Annual Subscription-5
SO-202 Matereality Workgroup DatabasePro
SO-202 Matereality Workgroup DatabasePro
SO-220 Matereality Material Supplier Database
SO-245 Matereality Scaled Material Data Server
SO-280 Matereality ANSYS DatabaseLite Upgrade
SP-101 Specimen Molding Services
SP-105 Specimen Machining Services
SR-010 Melt Flow Rate
SR-011 Relative Viscosity
SR-095 Brookfield Viscosity
ST-308 Mold Shrinkage
T-010 DSC Scan
T-012 Transition and Eject Temperature
T-015 Specific Heat
T-020 Heat Deflection Temperature
T-021 Vicat Softening Temperature
T-101 Thermal Conductivity (Melt)
T-102 Thermal Conductivity (Solid)
T-103 Thermal Conductivity Scan
T-107 Thermal Conductivity by Guarded Heat Flow Meter (Single Point)
T-108 Thermal Conductivity by Guarded Heat Flow Meter (Scan)
T-110 Thermal Conductivity of Films by Guarded Heat Flow Meter
T-150 Heat Transfer Coefficient
T-201 Carbon Black Content by TGA
T-203 Thermogravimetric Analysis (TGA)
T-302 Thermal Expansion Coefficient by TMA (Anisotropic)
T-303 Thermal Expansion Coefficient by TMA
T-310 Thermal Diffusivity by Holometrix (Scan)
T-311 Thermal Diffusivity by Holometrix (Single Point)
U-060 Universal TestPak-Injection Molding of Isotropic Materials
U-061 Universal TestPak-Injection Molding of Anisotropic Materials
U-063 Moldflow CRIMS Shrinkage Option
U-064 SIGMASOFT Shrinkage Option
U-065 Juncture Loss Option for Moldflow
V-101 Falling Dart Impact Validation for LS-DYNA Crash Material Model
V-102 Falling Dart Impact Validation for Abaqus Crash Models
V-150 Ribbed Plaque Flexural Validation for Abaqus *Elastic *Plastic Model
V-151 Ribbed Plaque Flexural Validation for Elastic Plastic Model
V-160 Compressive Validation for ANSYS Hyperelastic Model
V-170 Torsional Crank Validation of Additive Material Models in ANSYS
V-171 Torsional Crank Validation of Additive Material Models in Abaqus
V-172 Torsional Crank Validation of Additive Material Models in RADIOSS
Z-996 Data Unit Conversion
Z-998 Data Analysis
Z-999 Custom Test