BD Abaqus *CREEP, LAW=TIME
Test ID
Q-210
Description
Creep strain vs. time is measured at three stress levels (typically 15, 30 and 45% of total yield stress) and a single temperature, and the results are fit with the time hardening law model. Results are reported in US units. Because creep measurements are typically recorded for 1000 hours, results are not available within the standard 5 day turnaround - please call for availability.
Included Tests
| 3x | M-250 | Tensile Creep |
Options
Testing can be performed above room temperature.
Samples
: 10 tensile bars
[details]Application
The creep model is used to simulate the effect of load being applied to a component over a long period of time.
