DIGIMAT MX Creep (TEVP)G-175
Description
This TestPak provides data input for DIGIMAT MX reverse engineeering. It includes tensile stress-strain, strength and modulus, and Poisson's ratio performed on specimens cut in the 0° orientation. Additionally, tensile stress-strain, strength and modulus tests are performed on specimens cut in the 45° and 90° direction. This is supplemented by creep tests on 0° specimens at three stress levels.
Included Tests
| 2x | M-204 | Tensile Stress-Strain, Strength, and Modulus |
| 1x | M-206 | Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio |
| 3x | M-250 | Tensile Creep |
Options
-A reverse engineering service is offered to create a DIGIMAT material card [G-175RE]
-15°, 30°, 60° orientiations
-Creep rupture to determine failure
Samples
Application
This model is used to describe material deformation under load over time. For use in applications in which analysis extends beyond the elastic region of a material into the plastic region. This model is not recommended for materials exhibiting large strains. It is designed for materials obeying the von Mises yield criteria.
Add to Cart