Fiber Reinforced Thermoplastic for Simulation (Validation Package)
Test ID
Q-401
Description
Tensile tests are performed at strain rates of 0.001, 0.1 and 100 /s and three orientations taken only 50 mm from the gate of the plaque. All machining and molding is performed as described in Q-400.
Included Tests
3x | M-235 | Very High Speed Tensile Stress-Strain |
6x | M-204 | Tensile Stress-Strain, Strength, and Modulus |
1x | SP-105 | Specimen Machining Services |
Options
Non-ambinet temperature testing is available for additional cost.
Samples
: 60 plaques
[details]Application
This set of tests provide the required results needed to perform a validation of the fiber orientation material model described in Q-400. For strain measurements place a virtual extensometer at the standard 10 mm length and report strain from this extensometer; in addition place a second extensometer at the end of the radius section of the tensile bar (30 mm) to report displacement between these points.