INSTRON 5566 UTM Testing Services

How Our Lab Uses the INSTRON 5566 UTM

The Instron 5566 Universal Testing Machine allows a wide range of mechanical properties testing. Simple changes of setup allow for measurement of tensile, flexural and compressive properties, as well as coefficient of friction, creep-relaxation and other properties of interest.

Common Applications

  • video extensometry for non-contact elongation measurements

  • tensile, compressive, flexural stress-strain data

  • Poisson's ratio

  • Young's modulus, shear modulus

  • elevated & cryogenic temperatures

  • tensile, compressive, shear strength

  • friction coefficients

  • fracture mechanics

Operating Ranges Offered

Load 2N to 10kN
Speed 0.005 to 500 mm/min
Temperature -70 to 350°C

Related Testing Services

M-037 Plastic Point In Compression
M-038 Shear Strength
M-035 Plastic Point in Tension
M-102 Poisson’s Ratio and Tensile Modulus (2-3 Direction)
R-040 Equibiaxial Elongational Viscosity (1 Temperature, 1 Strain Rates)
M-015 Flexural Modulus and Strength
M-030 Tensile Strength
M-032 Tear Strength of Rubber
M-212 Compressive Properties of Elastomers
M-221 3 Point Flexural Stress-Strain, Strength and Modulus
M-225 4 Point Flexural Stress-Strain, Strength and Modulus
M-017 In-Plane Shear Modulus (Plate Twist Method)
M-043 Peel Test
M-205 Tensile Properties of Elastomers
M-213 Confined Compression Stress-Strain (Hydrostatic, for rubbers)
M-218 Equibiaxial Tension of Elastomers
M-101 Poisson’s Ratio and Tensile Modulus
M-101T SIGMASOFT Mechanical Test
M-204 Tensile Stress-Strain, Strength, and Modulus
M-621 Cyclic Mullins Effect
M-220 Planar Tension (Shear)
M-013 Orthotropic In-Plane Shear Modulus (Includes M-010, M-101)
M-012 Compressive Modulus
M-011 Tensile Modulus
M-010 Anisotropic Tensile Moduli
M-016 Tensile Modulus, Strength and Elongation
M-206 Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio
M-036 Plastic Point in Flexure
M-060 Coefficient of Friction (Static and Dynamic)
M-033 Blocking Strength
M-039 Low Temperature Bend Test
M-130 Tensile Strength with Plots
M-204Q Mechanical Quality
M-215 Compressive Properties of Foam with Unloading
M-240 Pure Shear of Fabrics
V-160 Compressive Validation for ANSYS Hyperelastic Model
M-017t Plate Twist Shear Modulus For 5 Temperatures
M-102T SIGMASOFT Mechanical Test (2-3 direction)
C-121 Determination of Strain Hardening Modulus in relation to slow crack growth [ESCR altenative]
M-626 Tensile Stress Relaxation (up to 4 hours hold time)
INSTRON 5566 UTM used for in-house testing at DatapointLabs
The INSTRON 5566 UTM at DatapointLabs

Get Started

  1. Share your requirements

    Tell us about the material, application, environment, and any method, standard, specimen, or conditioning constraints.

  2. Confirm the approach

    We’ll align the appropriate method, specimen requirements, and deliverables to your objectives, then provide a quote and test plan.

  3. Submit your PO and materials

    Send the purchase order and arrange delivery of materials or specimens so the program can move into scheduling and execution.

  4. Receive your results

    You’ll receive an engineering test report with digital data delivery, along with any agreed raw data or method-appropriate outputs.

    Typical turnaround for most testing is five business days. Longer-duration programs may require more time.

Ready to proceed? Contact us
livechat button