Creep testers Testing Services
How Our Lab Uses the Creep testers
A creep apparatus is used to apply a specified constant load (stress) to the sample. Measurements of displacement are recorded at intervals throughout the duration of the test.
Due to the long term nature of creep testing it is necessary to speak to a sales associate before placing your order.
Due to the long term nature of creep testing it is necessary to speak to a sales associate before placing your order.
Common Applications
-
creep strain vs. time, creep modulus vs. time, isochronous stress-strain curves
Operating Ranges Offered
| Compressive | |
| Load range | 80N to 1745N |
|---|---|
| Equivalent stress | .5 MPa to 10 MPa, |
| using ASTM prism specimens 12.7 x 12.7 mm | |
| Load range | 70N to 1745N |
| Equivalent stress | 3 MPa to 74 MPa |
| using ASTM slim specimens 4.850 x 4.850 mm | |
| Temperature range | 0°C to 100°C |
| Flexural | |
| Load range | 2N to 50N |
| Equivalent stress | 1 MPa to 23MPa, |
| using standard ASTM or ISO flex bar | |
| Temperature range | ambient to 140°C |
| Tensile | |
| Load range | 25N to 1745N |
| Equivalent Stress | 2MPa to 42MPa, |
| using standard ASTM and ISO specimens | |
| Temperature range | 0°C to 100°C |
Related Testing Services
| M-260 | Compression Set of Rubbers (Constant Deflection) |
|---|---|
| M-254 | Creep Rupture |
| M-266 | Long Term Instrumented Stress Relaxation |
| M-250 | Tensile Creep |
| M-251 | Compressive Creep |
| M-252 | Flexural Creep |
| M-255 | All-Round Notch Creep |
| M-250Q | Creep Quality |
| M-250H | Tensile Creep With Humidity |
| M-250HT | High Temperature Tensile Creep |
The Creep testers at DatapointLabs
Get Started
1
Share your requirements
Tell us about the material, application, environment, and any method, standard, specimen, or conditioning constraints.
2
Confirm the approach
We’ll align the appropriate method, specimen requirements, and deliverables to your objectives, then provide a quote and test plan.
3
Submit your PO and materials
Send the purchase order and arrange delivery of materials or specimens so the program can move into scheduling and execution.
4
Receive your results
You’ll receive an engineering test report with digital data delivery, along with any agreed raw data or method-appropriate outputs.
