Tensile Fatigue of Metals (up to 60 Hz)
Test ID
M-512M
Description
A single tensile fatigue specimen is loaded and unloaded at the desired stresses and frequencies until failure occurs. This test is performed per ASTM E466. The default parameters for this test are 30 Hz, R=0.1 with an expected failure of 10 million cycles at 23°C with specimen machining and polishing included. Prices vary by the parameters so please call if your parameters differ from these.
Options
This test can be performed as low as -55°C or as high as 1200°C. Frequencies, number of cycles, and stress ratio can be varied.
Standards
- ASTM E466
Data
Cycles to Failure. This data appears in Matereality as Tensile Fatigue.
Replicates
Number of times this test is repeated: 1
Samples
1 call [details]
Application
Tensile fatigue tests are used to evaluate a materials resistance to repeated loading. This property is critical for any application in which there is vibration or repeated motion under load.
