Universal TestPak-Injection Molding of Anisotropic Materials

Test ID



The Universal Molding TestPak is intended to provide test data and material models that can be used in a wide range of injection molding softwares. These include Autodesk Moldflow, Moldex3D, Simpoe-Mold, and SOLIDWORKS Plastics. This TestPak includes allows the user to simulate all phases of the injection molding process: Filling, Pack/Cool, and Warp/Shrink. NOTE: Viscoelastic simulations performed inside SIGMASOFT are not included in this TestPak. This TestPak provides Moldflow Gold-Gold-Gold .udb files. TestPak U-063 must be added for GMW16355.

Included Tests

1x M-017 In-Plane Shear Modulus (Plate Twist Method)
1x T-103 Thermal Conductivity Scan
1x T-302 Thermal Expansion Coefficient by TMA (Anisotropic)
1x T-015 Specific Heat
3x R-011 Capillary Rheology (1 Temperature)
1x M-101 Poisson’s Ratio and Tensile Modulus
1x D-020 PVT (Isothermal Heating)
1x M-102 Poisson’s Ratio and Tensile Modulus (2-3 Direction)


Additional CRIMS testing can be added with TestPak U-063. Additional properties for SIGMASOFT can be added with TestPak U-064. Bagley correction test data for Juncture Loss calculation in Moldflow can be added through U-065 TestPak.


: 2 kg of pellets


: 15 plaques (4 x 12in)



Use this TestPak to generate data required to analyze every phase of the molding operation, including filling, packing, cooling, shrinkage and warpage, and where available, post-mold opening. The effects of fiber orientation are taken into account, providing data that can be used to predict anisotropic shrinkage and warpage due to fiber fillers.

livechat button