GM CAE filled testing (tension up to 1000/s, shear flex, impact) No DIC per strain rate
Q-505L
Description
This Testpak includes testing to satisfy GM CAE testing requirements for filled materials. It covers 6 strain rates; 0.001-1000/s excluding 0.1/s. 2 reps of DIC per strain rate up to 100/s is performed. Testing is performed in three orientations, 0°, 45°, and 90°. Another tensile test using a full sized tensile bar is also performed. Shear tests in three orientations (0°, 45°, and 90°) are performed along with a density test. Flexural tests at 2 speeds and two orientations (0° and 90°) are performed. An impact test is also performed at 4.4 m/s and 2.2 m/s.
Included Tests
| 1x | D-010 | Solid Density |
| 1x | M-206 | Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio |
| 9x | M-204 | Tensile Stress-Strain, Strength, and Modulus |
| 6x | M-232 | High Speed Tensile Stress-Strain |
| 3x | M-235 | Very High Speed Tensile Stress-Strain |
| 3x | M-219 | Shear Stress-Strain |
| 2x | M-221 | 3 Point Flexural Stress-Strain, Strength and Modulus |
| 2x | M-230 | High Speed 3 Point Flexural Stress-Strain |
| 1x | M-410 | Dynatup Instrumented Impact |
| 1x | P-210 | Test Specimen Photo Documentation |
| 1x | SP-105 | Specimen Machining Services |
