Testing for rubber
Physical test methods for the characterization of the material behavior in tension, compression, shear volumetric response. Additionally, visco-elastic and stress-relaxation measurements provide information into time-dependent and long term behavior. Failure characteristics including tear strength. These materials are classified under the category of hyperelastic materials.
TestPaks typically ordered for rubber
| Testpak ID | Name |
|---|---|
| G-761 | Ansys Hyperelastic (HYPER) |
| G-720 | Abaqus Hyperelastic Incompressible (*HYPERELASTIC) |
| G-268 | SIGMASOFT Elastomer: Standard Filling + Curing |
| G-760 | Ansys Hyperelastic w/ compressibility (HYPER) |
| G-722 | Abaqus Hyperelastic Compressible (*HYPERELASTIC) |
| G-784 | LS-DYNA Simplified Rubber with Rate Dependency (MAT_181) |
| G-660 | SolidWorks HyperElastic – Ogden and Mooney Rivlin |
| G-782 | LS-DYNA Hyperviscoelastic Rubber (MAT_077) |
| G-914 | MSC.MARC Hyperelastic Model |
| G-780 | LS-DYNA Hyperelastic (MAT_027) |
Tests typically ordered for rubber
Get Started
1
Share your requirements
Tell us about the material, application, environment, and any method, standard, specimen, or conditioning constraints.
2
Confirm the approach
We’ll align the appropriate method, specimen requirements, and deliverables to your objectives, then provide a quote and test plan.
3
Submit your PO and materials
Send the purchase order and arrange delivery of materials or specimens so the program can move into scheduling and execution.
4
Receive your results
You’ll receive an engineering test report with digital data delivery, along with any agreed raw data or method-appropriate outputs.
