Test ID Test name
M-010 Anisotropic Tensile Moduli
M-011 Tensile Modulus
M-012 Compressive Modulus
M-013 Orthotropic In-Plane Shear Modulus (Includes M-010, M-101)
M-014 Bulk Modulus (Up To 8 Temperatures)
M-015 Flexural Modulus and Strength
M-016 Tensile Modulus, Strength and Elongation
M-017 In-Plane Shear Modulus (Plate Twist Method)
M-030 Tensile Strength
M-031 Compressive Strength
M-032 Tear Strength of Rubber
M-033 Blocking Strength
M-034 Short Beam Shear Strength
M-034C Short Beam Shear Strength for Composite Materials
M-035 Plastic Point in Tension
M-036 Plastic Point in Flexure
M-037 Plastic Point In Compression
M-038 Shear Strength
M-040 Bearing Strength
M-040C Bearing Response for Composite Materials
M-041 Lap Shear Strength
M-043 Peel Test
M-050 Open Hole Tension (OHT)
M-051 Open Hole Compression (OHC)
M-052 Fracture Toughness and Strain Energy Release Rate
M-052M Fracture Toughness of Metals (K1c)
M-053M Crack Propagation of Metallic Materials
M-060 Coefficient of Friction (Static and Dynamic)
M-067 Abrasion Test, Filament & Wire
M-068 Taber Abrasion Test
M-101 Poisson’s Ratio and Tensile Modulus
M-102 Poisson’s Ratio and Tensile Modulus (2-3 Direction)
M-130 Tensile Strength with Plots
M-204 Tensile Stress-Strain, Strength, and Modulus
M-204C Tensile Stress-Strain, Strength, and Modulus for Composite Materials
M-204C_45 In-Plane Shear Stress-Strain, Strength and Modulus by Tensile test of a ±45° laminate
M-204HT High Temperature Tensile Stress Strain for Metals
M-204V True Stress Strain Measurements Using 3D DIC
M-205 Tensile Properties of Elastomers
M-206 Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio
M-206C Tensile Stress-Strain, Strength, Modulus, and Poisson's ratio for Composite Materials
M-209 Combined Loading Compression (CLC)
M-209C_strength Compressive Strength using Combined Loading Compression (CLC) for composite materials
M-210 Compressive Stress-Strain, Strength and Modulus
M-211 Lubricated Compressive Stress-Strain (Biaxial Tension)
M-212 Compressive Properties of Elastomers
M-213 Confined Compression Stress-Strain (Hydrostatic, for rubbers)
M-215 Compressive Properties of Foam with Unloading
M-218 Equibiaxial Tension of Elastomers
M-219 Shear Stress-Strain
M-219C Shear Stress-Strain for Composite Materials
M-220 Planar Tension (Shear)
M-221 3 Point Flexural Stress-Strain, Strength and Modulus
M-221C 3 Point Flexural Stress-Strain, Strength and Modulus for Composite Materials
M-225 4 Point Flexural Stress-Strain, Strength and Modulus
M-225C 4 Point Flexural Stress-Strain, Strength and Modulus for Composite Materials
M-230 High Speed 3 Point Flexural Stress-Strain
M-231 High Speed Compressibility of Foams and Elastomers
M-232 High Speed Tensile Stress-Strain
M-233 High Speed Compressive Stress-Strain
M-235 Very High Speed Tensile Stress-Strain
M-242 Biaxial Force and Surface Strain by Punch Test
M-245 Forming Limit Diagram (FLD)
M-250 Tensile Creep
M-250H Tensile Creep With Humidity
M-250HT High Temperature Tensile Creep
M-251 Compressive Creep
M-252 Flexural Creep
M-254 Creep Rupture
M-260 Compression Set of Rubbers (Constant Deflection)
M-266 Long Term Instrumented Stress Relaxation
M-410 Dynatup Instrumented Impact
M-412 Falling Dart Uninstrumented Impact
M-425 Izod Pendulum Impact
M-427 Charpy Pendulum Impact
M-502 Flexural Fatigue
M-504 Flexural Fatigue S-N Curves
M-508 Tensile Fatigue S-N Curve
M-508M Tensile Fatigue S-N Curve of Metals (up to 60 Hz)
M-509 3 pt. Flexural Fatigue S-N Curve
M-512 Tensile Fatigue
M-512M Tensile Fatigue of Metals (up to 60 Hz)
M-513M Strain Controlled Fatigue of Metallic Materials (Up to 2 Hz)
M-515M Strain Controlled Tensile Fatigue E-N curves for Metals (Up to 2 Hz)
M-600 DMA - Tensile/Compressive ( 0.1-100 Hz)
M-600t DMA- Tensile/Compressive Mastercurve
M-601 DMA - Torsional (5 Temperatures, 0.1-500/s)
M-602 DMA - Flexural (0.1-100 Hz)
M-603 Shear Modulus vs. Temperature by DMA
M-604 Flexural Modulus vs. Temperature by DMA
M-605 Tensile Modulus vs. Temperature by DMA
M-606 Compressive Modulus vs. Temperature by DMA
M-610 Stress Relaxation/ Creep Compliance by DMA
M-611 Stress Relaxation/Creep Compliance by Time Sweeps
M-615 Creep-Relaxation by DMA-tensile, compressive or flex
M-620 Dynamic Hysteresis Loop
M-621 Cyclic Mullins Effect
M-622 Cyclic Hardening Stress-Strain
M-623 Cyclic Damage of Plastics
M-624 Stepwise Tensile Stress Relaxation
M-625 Stepwise Compressive Stress Relaxation
SM-067 Durometer Hardness
livechat button